標配功能

1、測試共軌噴油器

2、測試共軌泵

3、測試EUP\EUI

4、測試HEUI噴油器

5、測試HEUI促動泵

6、噴油器響應時間測試

7、IQA碼自定義修改噴油器各工況的噴油量

8、測試雙電磁閥E3泵噴嘴

9、自動生成噴油量補償修正碼

10、檢測噴油器電磁閥電阻 

11、檢測噴油器電磁閥電感

12、自動生成博世壓電噴油器ISA碼

13、噴油器開啟脈寬測試

14、噴油器開啟壓力測試

15、檢測噴油器電磁閥電流

16、檢測DRV閥控制電流

17、實時監控噴射驅動及系統電壓

18、油溫過高自動報警

19、油位不足自動報警

20、工控機電腦控制

21、雙驅動控制系統

22、強風冷散熱系統

23、24小時連續工作油溫不超42℃

24、軌壓可達260Mpa

25、智能化在線升級

選裝功能

1、VP44電控泵測試

2、雙路DRV配置

3、六通道同時觸發六只噴油器

4、同時生成六只噴油器修正碼

5、自動生成博世6、7、8、9、10位數IMA編碼

6、自動生成博世壓電IMA、ISA編碼

7、自動生成電裝QR油量修正碼

8、自動生成德爾福C2I、 C3I油量修正碼

9、自動生成西門子VDO(IIC)編碼

10、自動生成XPI（福康東康）修正碼

Standard functions

1.Test common rail injector

2.Test common rail pump

3.Test EUP \ EUI

4.Test the HEUI injector(Optional functions)

5.Test HEUI actuated pump(Optional functions)

6, Accurate injector BIP test

7, IQA code custom modification of the fuel injection amount of the fuel injector

8.Test the nozzle of the double solenoid valve E3 pump

9.Automatically generate fuel injection compensation code

10.Detection of the resistance of the injector solenoid valve

11.Detection of fuel injector solenoid valve inductance

12.Automatically generate ISA code for Bosch piezoelectric injectors

13.Injector opening pulse width test

14.Injector opening pressure test

15.Detect the injector solenoid valve current

16.Detection of DRV valve control current

17.Real-time monitoring of jet drive and system voltage

18.Automatic alarm when the oil temperature is too high

19.Automatic alarm for insufficient oil level

20. Industrial computer control

21.Dual drive control system

22.High efficiency and strong air cooling system

23, 24 hours continuous working oil temperature does not exceed 42 ℃

24.Rail pressure can reach 260Mpa

25.Intelligent online upgrade

Optional functions

1.VP44 electric control pump test

2.Dual DRV configuration

3.Six channels trigger six injectors at the same time

4. Simultaneously generate six fuel injector correction codes

5.Automatically generate Bosch 6, 7, 8, 9, and 10-digit IMA codes

6.Automatically generate Bosch piezoelectric IMA and ISA codes

7.Automatically generate Denso QR oil quantity correction code

8, automatic generation of Delphi C2I, C3I fuel quantity correction code

9.Automatically generate Siemens VDO (IIC) code

10、Automatically generate XPI (Fukang Dongkang) correction code

測試范圍部分與CRS725一樣

測試界面

操作間展示